Emerson MITX-430 Installation And Use Manual Download Page 36

Page: 36 / 160

Hardware Preparation and Installation

MITX-430/MITX-440-DVI-2E Installation and Use Guide (6806800K37B

)

2.1.4.1

Full Loading Running Burn-in Test

VGA and LVDS dual display, without DVI display.

2.1.4.2

Idle Mode Power Consumption

VGA and LVDS dual display, without DVI display, tested 1minute after logging in Windows XP.

12V

3.3V

Total (W)

Current (A)

1.18

2.25

Power (W)

14.16

11.25

3.3

28.71

Source

ATX

Tested with 12.1" LCD Panel (P/N: G121X1-L01). The LCD inverter uses 12V.

The test devices do not include PCIE x1 add-in card and Mini-PCIE card. The two SATA
devices are powered externally. If you use all the devices and power internally, then you
must add all the power consumption.

It is recommended to add more buffer while designing the ATX power supply.

12V

3.3V

Total (W)

Current (A)

0.96

2.03

1.1

Power (W)

11.52

10.15

3.63

25.3

Source

ATX

Tested with 12.1" LCD Panel (P/N: G121X1-L01). The LCD inverter uses 12V.

It is recommended to add more buffer while designing the ATX power supply.

Summary of Contents for MITX-430

































































































































































Search results

Summary of Contents for MITX-430

Reviews:

Emerson MITX-430, Installation And Use Manual, Page: 36 / 160

Search results

Summary of Contents for MITX-430

Reviews: