20
ETL Model No.: CF860
8. Light Kit Assembly Replacement
(Continued)
8.14
Unscrew the three plastic Phillips head screws securing
the Light Kit Assembly Array to the Light Kit Assembly
(Figure 37).
Remove the Light Kit Assembly Array from the
assembly.
Discard the Light Kit Assembly Array and three plastic
screws in the correct recycle bin.
PLASTIC PHILLIPS
HEAD SCREWS (3)
LIGHT KIT
ASSEMBLY
ARRAY
LIGHT KIT
ASSEMBLY
Figure 37
8.15
Slide the new Light Kit Assembly Array connector
through the center hole of the Light Kit Assembly.
Position the new Light Kit Assembly Array onto the Light
Kit Assembly.
NOTE: Handle the new Light Kit Assembly Array
around the edges of the Light Kit Assembly. Being
careful not to touch the LED diodes, located on the
Light Kit Assembly Array.
Reattach the new Light Kit Assembly Array by installing
the three plastic Phillips head screws (provided with
new replacement kit) (Figure 38).
LIGHT KIT
ASSEMBLY
ARRAY
DO NOT TOUCH LED
LIGHTING BUDS
Figure 38
8.16
Reconnect the Light Kit Assembly Driver two pin
connector to the Light Kit Assembly Array connector
(Figure 39).
LIGHT KIT ASSEMBLY
DRIVER TWO PIN
CONNECTOR
LIGHT KIT ASSEMBLY
ARRAY CONNECTOR
LIGHT KIT
ASSEMBLY
LIGHT KIT
ASSEMBLY
DRIVER
Figure 39
BP7515 CF860 Luray Eco 1/4/16 2:35 PM Page 20
