5
2. Clip or magnetize sensors to equipment
and place them as high off the ground as
possible to maximize communication to
the gateway.
RTS Technical Support
For technical assistance,
please contact McDonald’s help desk.
RTS Part
No.
Product Description
Certification
model no.
17050
RTS universal sensor
BEEKS001
17501-US
G
ateway supports 120 V,
60Hz electricity
BluFiAC00
17501-EU
Gateway supports 230V, 50Hz
electricity, Plug type C/F
BluFiAC00
17501-AU
Gateway supports 240V, 60Hz
electricity
BluFiAC00
17501-UK
Gateway supports 230V,
50Hz electricity, Plug type G
BluFiAC00
17052
LR (Long Range) RTS sensor
BEEKSLR001
17502-EU
Plenum Gateway with EU
power supply
BluFi-DC00
17502-US
Plenum Gateway with US
power supply
BluFi-DC00
17502-AU
Plenum Gateway with AU
power supply
BluFi-DC00
17502-UK
Plenum Gateway with UK
power supply
BluFi-DC00
Clip example
Magnet example
3. Install LR sensors in walk-in freezers using
the clips or magnets. Place them as high
off the ground as possible. If clipped to a
rack, they should be placed at the front of
the rack. Sensors should face the door if
possible for better signal strength.
Clip example
Magnet example
Step 4: Completing setup with mobile
device
1. To complete the device setup, scan the QR
code below with your mobile device.
2. Select your digital food provider and follow
their instructions for completing the setup.
Step 3: Install Sensors
1. Install sensors into brackets (brackets
ordered separately)
Slide the sensor into the
bracket
Push the sensor to snap it into
the bracket
1
2
Slide the sensor into the
bracket
Push the two brackets
together to snap into place
1
2
