Advanced Microprocessor Controls Setup
4
3.0
A
DVANCED
M
ICROPROCESSOR
C
ONTROLS
S
ETUP
The Advanced Microprocessor (AM) Control for your Liebert Deluxe unit features an easy to use
menu driven LCD display. The menus, control features, and circuit board details are described in this
section. For more control details refer to
5.0 - Response by Control Type—Advanced Micropro-
cessor Controls
, and for more alarm information refer to
6.0 - Alarm Descriptions and Solu-
tions
.
3.1
Basics
Control keys include ON/OFF, MENU/ESCAPE, ENTER, Increase (UP) arrow, and Decrease
(DOWN) arrow. Refer to
Figure 1
. These keys are used to move through the menus as prompted on
the LCD display (refer to
Figure 2
).
To turn the unit on, press the ON/OFF key after power is applied. To turn the unit off, press the ON/
OFF key before power is disconnected.
Active alarms are displayed on the LCD screen. An audible beeper also annunciates alarms. To
silence an alarm, press the ENTER key as prompted on the display. The unit stores the 10 most
recent alarms for review.
Setpoints, DIP switch settings, and other selections were made on your unit before testing at the fac-
tory. Setpoints were chosen based on typical operating experience. Other selections were made based
on options included with your unit. Make adjustments to the factory default selections ONLY if they
do not meet your specifications. When entering setpoints, time delays, etc., the allowable ranges are
displayed and may require a password, if enabled.
Figure 1
Advanced microprocessor control panel
3.2
Display the Main Menu—AM Control
Press the MENU/ESC key to display the Main Menu. The menu selections include:
STATUS/ALARM DATA
SETPOINTS/SETUP
DATE AND TIME
STATUS DISPLAY
