18
EN
O
PTIONAL SETTING
Note:
• After setting “Auto Channel Scan”, using
[CH
K
/
L
]
on the
remote control skips unavailable programs automatically.
• If you connect the cable system directly, contact the CATV
installer.
• If you press
[POWER]
or
[SETUP]
during auto channel
scan, the setting will be canceled.
• Channel settings will be saved even if the power fails.
• Even if “Autoscan“ is completed, the channel setting will be
lost if the AC power cord is unplugged before turning off
the unit by pressing
[POWER]
.
Channel List
The channels selected here can be skipped when selecting the channels
using
[CH
K
/
L
]
.
Those channels can still be selected with
[the Number buttons]
.
1
Press
[SETUP]
to display the main menu.
2
Use
[Cursor
K
/
L
]
to select “CHANNEL”, then press
[ENTER]
.
3
Use
[Cursor
K
/
L
]
to select “Channel List”, then press
[ENTER]
.
Channel
Channel
Autoscan
Channel List
Manual Register
Antenna
4
Use
[Cursor
K
/
L
]
to select the channel you want to
skip, then press
[ENTER]
.
Channel List
Channel List
DTV
8
DTV
8
9
9
DTV
48
DTV
48
58
58
DTV
6
DTV
6
27
DTV
67
Ch Select
Watch/Skip
Back
BACK
ENTER
Highlight channels for Ch
Up/Down key selection.
The selected channel darkens in the channel list,
and it skips when selecting the channels by using
[CH
K
/
L
]
.
To re-register the skipping channels, use
[Cursor
K
/
L
]
and press
[ENTER]
. The registered channels will be gray
in the channel list, and you can select those channels
by using
[CH
K
/
L
]
again.
When you skip a major channel, its minor channels
are skipped as well.
Note:
• The channel with “DTV” indicated on the display is ATSC.
Otherwise the channel is NTSC.
5
Press
[SETUP]
to exit.
5
•
•
•
