Installation, Operation and Maintenance Manual
VCIOM-02377-EN Rev. 0
May 2022
5
Installation
Section 4: Installation
Section 4: Installation
To assemble the OM11 into the EPI2 actuator, proceed as follows:
•
Ensure that all the parts received with the OM11 are available, as described in
Section 12, Optional Kits.
•
Using Section 12, Optional Kits, select only mechanical parts (screws and spacers)
depending on actuator models.
•
Gather the right tools for the assembly and for setting the actuator controls.
•
With an Allen wrench of 5 mm, unscrew the cover screws, see Figure 5.
Figure 5
•
Remove the actuator cover, see Figure 6.
Figure 6
Follow one of the following assembling procedures depending on actuator model.
