14
ETL Model No.: CF330
6. Final Assembly
6.2
Carefully tuck all the wires and connectors into the Light
Kit Housing Assembly.
Position the LED Array onto the Light Kit Housing
Assembly, aligning the three holes.
NOTE: Verify that the wires and connectors are not
trapped between the LED Array and the Light Kit
Housing Assembly.
Install and tighten the three #6-32 x 1/4” Tress Head
Screws with Lockwashers (Figure 21) for assembly of
the LED Array.
#6-32 x 1/4" TRESS
HEAD SCREWS WITH
LOCKWASHERS (3)
LED ARRAY
LIGHT KIT HOUSING
ASSEMBLY
Figure 21
To avoid possible fire or shock, do not pinch wires
between the Light Kit Housing Assembly and the
LED Array.
WARNING
!
6.1
Engage the Fan Motor 2-Pin Wire Connector into the
2-pin Wire Connector of the LED Array (Figure 20).
The connection is complete when you hear a soft click.
LED ARRAY
2-PIN WIRE CONNECTOR
FAN MOTOR
2-PIN WIRE CONNECTOR
LED ARRAY
Figure 20
6.3
Place the Shade into the opening of the Light Kit
Housing Assembly, aligning the three flat areas on the
top edge of the Shade with the three raised dimples on
the Light Kit Housing Assembly and turn the Shade
clockwise until it stops (Figure 22).
NOTE: Periodically check that the shade is seated
fully clockwise in the Light Kit Housing Assembly.
SHADE
SHADE FLAT
AREA (3)
LIGHT KIT
HOUSING
ASSEMBLY
DIMPLES (3)
ROTATE
CLOCKWISE
Figure 22
