3
PACSystems™ RX3i Central
Processing Unit IC695CPE302
GFK-3038B
▪
Supports most Series 90-30 modules and expansion racks. For supported I/O,
Communications, Motion, and Intelligent modules, refer to the
PACSystems
RX3i Hardware and Installation Manual
, GFK-2314
▪
Supports up to 512 program blocks (Maximum size for a block is 128KB)
▪
Configured with an RS-232 serial port
▪
Enabled with an embedded Ethernet interface to support up to 32
simultaneous SRTP Server connections, up to 16 simultaneous Modbus/TCP
Server connections, and up to 16 simultaneous communications channels of
either SRTP Channels or Modbus/TCP Client channels. For details, refer to the
PACSystems RX3i TCP/IP Ethernet Communications User Manual
, GFK-2224
▪
Supports OPC UA
▪
Supports Ethernet Global Data, Class 1
▪
Supports HART
®
Pass Through
▪
Time synchronization to SNTP Time Server on Ethernet network when used
with a rack-based Ethernet module (IC695ETM001) version 5.0 or later
▪
Enhanced ability to display serial number and date code in
PME’s
D evice
Information Details.
▪
Ability to transfer applications to and from USB 2.0 A type removable data
storage devices, or RD SDs.
▪
Compliant with EU RoHS Directive 2002/95/EC using the following
exemptions identified in the Annex: 7(a), 7(c)-I and III, and 15.
HART® is a registered trademark of the HART Communication Foundation of Austin, Texas USA.
Any use of the term HART hereafter in this document, or any document referenced by this
document, implies the registered trademark.
