14
PACSystems™ RX3i Central
Processing Unit IC695CPE302
GFK-3038B
Initial Configuration
1.
Using PAC Machine Edition (PME) software, configure the CPE302 in
an RX3i target.
Note:
If you intend to use the module’s embedded Ethernet
interface, you will probably need to assign it a new IP
address. To configure the embedded Ethernet interface in
Machine Edition, expand the CPU slot to display the
Ethernet daughterboard. The Settings tab for the
embedded Ethernet module contains IP Address, Subnet
Mask and Gateway IP Address (see the following diagram).
Consult your network administrator for the proper values
for these parameters.
Figure 3: Configuration of the Ethernet Port on CPE302
