Emerson HIGHPOINT CF205BS01 Owner'S Manual Download Page 27 | Manualshive

Page: 27 / 30

background image

27

emersonfans.com

Please contact 1-800-654-3545 for further assistance

U.L. Model No.: CF205

12. Repair Parts Listing

Before discarding packaging material, be certain all parts have been removed.

HOW TO ORDER REPAIR PARTS

WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION:
• PART NUMBER • NAME OF ITEM

• PART DESCRIPTION • MODEL NUMBER
The model number of your Fan will be found on a label attached to the top housing.
For repair parts, phone 1-800-654-3545.

Model Numbers

Key

No. Description CF205BS01 CF205GES01 CF205GRT01 CF205VS01

* Hanger Pack,

Consisting of: 761655-74 761655-39 761655-103 761655-91

1 Hanger Bracket — — — —

2 Hanger Ball — — — —

3 12” Downrod — — — —
* Parts Bag, Containing: 763596 763596-1 763596-1 763596-1

4 Wire Connector (7) — — — —

5 Threaded Stud, 8-32 x 1-1/4” (2) — — — —

6 Knurled Knob (2) — — — —

7 Lockwasher (2) — — — —

8 Hairpin Clip — — — —

9 Clevis Pin — — — —

10 Screw, Oval Head, 10-24 x 9 mm (10) — — — —

11 Screw, Pan Head, 1/4-20 x 11 mm (7) — — — —

12 Screw, Pan Head, #8-32 x 10 mm and lockwashers (1) — — — —

13   Blade Balance Kit          —       —     —       —
14   Decorative Blade Nuts (9)      763599-BS   763599-GES 763599-GRT   763599-VS
15   Cover, Ceiling       763592-BS   763592-GES 763592-GRT   763592-VS
16   Support Assembly, Rod       762709-BS   762709-GES 762709-GRT   762709-VS
17   Rod Assembly, Decorative (3)    762710-BS   762710-GES 762710-GRT   762710-VS
18   Screw, Decorative Rod (6)       762711-BS   762711-GES 762711-GRT   762711-VS
19   Cover, Coupler         762708-BS   762708-GES 762708-GRT   762708-VS
20   Blade Set (full set for one fan)      763601   763601-1   763601-CR/TM 763601-2
21   Flange Set (full set for one fan)    763597-BS   763597-GES 763597-GRT   763597-VS
22   Harness Assembly, Wiring      763595 763595   763595     763595
23   Fitter Assembly, Light       763603-BS   763603-GES 763603-GRT   763603-VS
24   Glass, Lower         763605   763605-1   763605   763605-2
25   Cover Plate          763609-BS   763609-GES 763609-GRT   763609-VS
26   Bulb, Halogen, 50-watt Mini-Candelabra Base    —    — —      —
27   Downrod, 6”          761631-32   761631-44   761631-117   761631-104
28   Transmitter, Remote Control, SR401    764090 764090   764090 764090
29   Receiver        764089 764089   764089 764089
—   Owner's Manual         BP7375-3 BP7375-3   BP7375-3 BP7375-3

«
...
25
26
27
28
29
...
»

Summary of Contents for HIGHPOINT CF205BS01































Reviews:

No comments

Related manuals for HIGHPOINT CF205BS01

Brand: Greenheck Pages: 1

WOOZOO STF-DC18T

Brand: Ohyama Pages: 86

Brand: W. L. Gore Pages: 2

Brand: Harbor Breeze Pages: 19

Brand: ebm-papst Pages: 9

Brand: Hunter Pages: 35

Brand: Livoo Pages: 9

Brand: Harbor Breeze Pages: 18

Brand: Parrot Uncle Pages: 10

Brand: Maico Pages: 4

Brand: Lindab Pages: 25

Brand: Warehouse of Tiffany Pages: 12

Brand: BRAYER Pages: 45

Brand: Eglo Pages: 18

Brand: REVENT Pages: 88

Brand: Holmes Pages: 2

Brand: Clas Ohlson Pages: 24

Brand: iFan Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands