13
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF205
To avoid possible fire or shock, do not pinch the
antenna wire between the hanger bracket and the
receiver.
WARNING
!
F
O
R
L
IG
H
T
T
O
M
O
T
O
R
N
AC IN
N
T
O
M
O
T
O
R
L
RECEIVER ANTENNA WIRE
AC I
N L
RECEIVER
Figure 18
5.2
Locate the electronic receiver and insert its antenna wire
into the opening of the hanger bracket above the hanger
ball. Continue to insert the body of the receiver (flat side
facing up) into the opening, orient as shown. Be careful
not to pinch any wires between the receiver body and the
bracket or ball (Figure 18).
If you feel that you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
5.1
CAUTION: To reduce the risk of electrical shock,
disconnect the electrical supply circuit before
installing the fan, light kit or receiver.
Disconnect electrical power to the branch circuit at the
circuit breaker or fuse box before attempting to wire the
ceiling fan.
5. How to Wire Your Ceiling Fan
To avoid possible electrical shock, be sure electricity is
turned off at the main fuse box before wiring.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
WARNING
!
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product
by Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product by
Emerson Electric Co. could result in personal injury
or property damage.
WARNING
!
Turning off wall switch is not sufficient. To avoid possible
electrical shock, be sure electricity is turned off at the
main fuse box before wiring. All wiring must be in
accordance with National and Local codes and the ceiling
fan must be properly grounded as a precaution against
possible electrical shock.
WARNING
!
