19
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF205
7.1
Screw the two 50-watt mini-candelabra base halogen
bulbs (supplied) into the light kit plate sockets (Figure 29).
Do not touch the glass bulb; use the porcelain base to
screw in the bulb, or wear soft gloves.
CAUTION: To avoid risks of burns or other injury,
assure power is off before attempting to install or
replace the halogen bulbs.
NOTICE: Do not touch halogen bulbs with bare hands.
Fingerprints may result in shorter bulb life. Remove
fingerprints with alcohol.
7. Final Installation
LIGHT KIT PLATE
LIGHT KIT PLATE
SOCKETS (2)
50-WATT MINI-CANDELABRA
BASE HALOGEN BULBS (2)
Figure 29
7.2
Place the lower glass into the light fitter, aligning the three
flat areas on the top flange of the lower glass with the
three pins on the inside of the fitter (Figure 30). Then turn
the lower glass clockwise until it stops turning.
Your ceiling fan is now installed and wired to be controlled
by your wall control.
LIGHT KIT
PLATE
LIGHT KIT
LOWER
GLASS
FLAT AREA
Figure 30
Turning off wall switch is not sufficient. To avoid possible
electrical shock, be sure electricity is turned off at the
main fuse box before wiring. All wiring must be in
accordance with National and Local codes and the ceiling
fan must be properly grounded as a precaution against
possible electrical shock.
WARNING
!