Type SR5 Sanitary Pressure Regulator
Figure 1.
Type SR5
!
WARNING
Failure to follow these instructions or to
properly install and maintain this equipment
could result in an explosion, fire and/or
chemical contamination causing property
damage and personal injury or death.
Fisher™ sanitary regulators must be
installed, operated and maintained
in accordance with federal, state and
local codes, rules and regulations and
Emerson Process Management Regulator
Technologies, Inc. instructions.
If the regulator vents gas or a leak develops in
the system, service to the unit may be required.
Failure to correct trouble could result in a
hazardous condition.
Installation, operation and maintenance
procedures performed by unqualified
personnel may result in improper adjustment
and unsafe operation. Either condition may
W8966
result in equipment damage or personal
injury. Use qualified personnel when
installing, operating and maintaining the
Type SR5 Sanitary Pressure Regulator.
Introduction
The Type SR5 self-contained pressure regulators are
suitable for pressure control of steam, liquid or gaseous
service. Typical setpoint ranges from 2 to 135 psig / 0.14
to 9.3 bar (ranges vary depending on body size). These
regulators are designed to meet sanitary application and
material requirements.
Scope of the Manual
This manual provides installation, startup, maintenance
and parts ordering information for the Type SR5 Sanitary
Pressure Regulator.
Instruction Manual
D103099X012
Type SR5
January 2020
