background image

www.Fisher.com

D103175X012

Design GX Control Valve and Actuator System

Contents

Introduction

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Scope of Manual

1

. . . . . . . . . . . . . . . . . . . . . . . . . 

Description

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Specifications

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Valve Installation

2

. . . . . . . . . . . . . . . . . . . . . . . . . . 

Maintenance

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Actuator Maintenance

4

. . . . . . . . . . . . . . . . . . . . . 

FIELDVUE

r

 DVC2000 Digital Valve

Controller Mounting

7

. . . . . . . . . . . . . . . . . . . . . 

Packing Maintenance

9

. . . . . . . . . . . . . . . . . . . . . 

Replacing Packing

9

. . . . . . . . . . . . . . . . . . . . . . . . 

Valve Trim Maintenance

13

. . . . . . . . . . . . . . . . . . 

Bellows Maintenance

16

. . . . . . . . . . . . . . . . . . . . 

Handwheel Operation

17

. . . . . . . . . . . . . . . . . . . . . 

Parts Ordering

29

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Parts Kits

30

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Parts List

31

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Introduction

Scope of Manual

This instruction manual includes installation,
maintenance, and parts information for the Design
GX control valve and actuator system.

No person may install, operate or maintain a Design
GX valve and actuator system without first 

D

 being

fully trained and qualified in valve, actuator and
accessory installation, operation and maintenance,
and 

D

 carefully reading and understanding the

contents of this manual. If you have any questions
about these instructions contact your Emerson
Process Management

t

 sales office before

proceeding.

Description

The Fisher Design GX is a compact, state-of-the-art
control valve and actuator system, designed to
control a wide range of process gases, vapors, and
fluids.

Figure 1. Design GX Control Valve, Actuator, and

FIELDVUE

r

 DVC2000 Series Digital Valve Controller

W8861

The Design GX is rugged, reliable, and easy to
select. It requires no actuator sizing -- the actuator
selection is automatic once the valve body
construction is selected.

The Design GX meets the requirements of both EN
and ASME standards. It is available with a complete
accessory package, including the FIELDVUE
DVC2000 Series integrated digital valve controller.

Note

Neither Emerson

r

, Emerson Process

Management, Fisher

r

, nor any of their

affiliated entities assumes
responsibility for the selection, use
and maintenance of any product.
Responsibility for the selection, use,
and maintenance of any product
remains with the purchaser and
end-user.

Instruction Manual

Form 5770
June 2006

GX Valve and Actuator

Summary of Contents for Fisher Design GX





























































Reviews: