background image

CS200 Series

 

D1031

19X012

Instruction Manual

Form 5832

November 2013

www.fisherregulators.com

CS200 Series Commercial / Industrial Pressure 

Reducing Regulators

Figure 1. 

 Typical CS200 Pressure Reducing Regulator

Introduction

Scope of the Manual

This manual provides instructions for the installation, 

maintenance, and parts ordering information for 

Types CS200IN, CS200IR, CS205IN, CS205IR, and 

CS206IR service regulators.

Table of Contents

Introduction   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Specifications

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Principle of Operation . . . . . . . . . . . . . . . . . . . . . . . . . 4

Installation and Overpressure Protection   . . . . . . . . . . 6

Startup  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Adjustment  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Shutdown  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Parts Ordering  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Parts List  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

P1188

Summary of Contents for FISHER CS200 Series













Reviews: