Instruction Manual
D100333X012
1069 Actuator
April 2018
14
Parts List
Note
Part numbers are shown for recommended spares only. For part
numbers not shown, contact your
or Local Business
Partner.
Key
Description
Part Number
1
Cylinder, aluminum (2 req'd)
2
Cylinder Flange, aluminum (2 req'd)
3
Cap Screw, zn pl steel (32 req'd)
4
Piston, aluminum & PTFE (2 req'd)
5*
O‐Ring, nitrile (2 req'd)
1H862606992
6
Piston Rod, cr pl S41600 stainless steel (2 req'd)
7
Rod End Bearing, alloy steel & PTFE (2 req'd)
8
Cap Screw, zn pl steel (2 req'd)
9
Travel Stop Screw, zn pl steel, 60‐degree rotation only
10*
O‐Ring, nitrile (2 req'd)
1H862606992
11*
O‐Ring, nitrile (2 req'd)
1D542906992
12*
O‐Ring, nitrile (2 req'd)
1P233206992
13
Sliding Seal, aluminum (2 req'd)
14
Seal Support Cylinder, aluminum (2 req'd)
15
Housing, cast iron
16
Cap Screw, zn pl steel (20 req'd)
17
Mounting Yoke, cast iron
18
Cap Screw, zn pl steel (8 req'd)
19
Lever, ductile iron
20
Cap Screw, zn pl steel (2 req'd)
21
Hub, aluminum or S41600 stainless steel
(1)
(not req'd w/manual operator)
21
Adaptor, S17400 stainless steel, heat‐treated (Use w/manual
operator only)
22
Retaining Ring, zn pl carbon steel (2 req'd)
23
Bearing, fiberglass/PTFE
24
Cover, aluminum/iridite
25
Cap Screw, zn pl steel (8 req'd)
26
Travel Indicator Scale, stainless steel
(Not req'd w/manual operator)
27
Self Tapping Screw, pl carbon steel (2 req'd)
(not req'd w/manual operator)
28
Travel Indicator, stainless steel (not req'd w/manual operator)
29
Self Tapping Screw, pl carbon steel (2 req'd)
(not req'd w/manual operator)
30
Positioner Plate, steel (none req'd w/positioner)
30
Positioner Adaptor, aluminum
(use w/3610JP positioner only)
Key
Description
Part Number
31
Cap Screw, zn pl steel (4 req'd)
32
Nameplate, stainless steel
33
Drive Screw, stainless steel (4 req'd)
34
Travel Stop Nut, steel, 60‐degree rotation only
35
Travel Stop Screw, zn pl steel
60‐degree rotation (1 req'd)
90‐degree rotation (2 req'd)
36
Thrust Washer, PTFE (2 req'd)
37
Hex Nut, zn pl steel, 60‐degree rotation only
38
Washer, pl carbon steel (8 req'd)
39
Hex Nut, zn pl steel
60‐degree rotation (1 req'd)
90‐degree rotation (2 req'd)
40
Bearing, fiberglass/PTFE
41
Set Screw, carbon steel
42
Anti‐Rotator Assembly, steel (2 req'd)
43
Cap Screw, zn pl carbon steel (2 req'd)
44
Plastic lead Seal Sealant
45
Lithium grease
46
Cap Screw, zn pl steel, 60‐degree rotation only
47
Cap Screw, zn pl steel, 90‐degree rotation only
Note
Key numbers 48 through 67 are to be used with valve positioner only,
unless otherwise specified. And key numbers 48 through 51 and 58
through 66 are to be used with volume boosters only.
48
Elbow (2 req'd)
49
Nipple (2 req'd
50
Elbow (none req'd w/manual operator)
51
Cross (Use w/manual operator only
52
Tubing,
(5)
3/8‐inch (9.5 mm) outer diameter (2 req'd - specify
accessories used w/actuator)
53
Bypass Valve (use w/manual operator only)
54
Bypass Tubing, (use w/manual operator only) (2 req'd - specify
accessories used w/actuator)
55
Tee
(2)
(2 req'd)
56
Connector
(5)
(2 req'd)
57
Tee
(5)
(use w/manual operator only) (2 req'd)
58
Elbow (use w/manual operator only)
59
Tee (use w/manual operator only)
60
Tee (3 req'd w/o manual operator; 2 req'd w/manual operator)
61
Elbow (use w/manual operator only)
63
Hose Assembly, Operation (2 req'd)
64
Hose Assembly, Supply
65
Hose Assembly, Bypass (use w/manual operator only)
66
Needle Valve (use w/manual operator only)
69
Washer, zn pl carbon steel (32 req'd)
70
Washer, S17400 stainless steel (4 req'd)
71
O‐Ring, nitrile (2 req'd)
*Recommended spare parts
1. Either aluminum or 416 stainless steel hub material will be supplied depending on
manufacturing location.
2. This part can also be used without valve positioner.
