Emerson EWL2005, Service Manual

Page: 12 / 52

4-1 L3202DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Step/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Unclamp/
Desolder
Note
[1]
Rear
Cabinet
D1 9(S-1), 2(S-2), ---
[2] Jack Holder D2 3(S-3), (S-4) ---
[3]
Inverter
CBA D2
D3
5(S-5), *CN450,
*CN460, *CN490,
*CLN411
---
[4] Main CBA
D2
D3
9(S-6), *CN101A,
*CN102A, *CN103A,
*CN801, *CN802
---
[5]
LCD Main
CBA &
Liquid
Crystal
Panel Unit
D2
D3
13(S-7), *CN104,
CN105, CN311,
CN312
---
[6]
Function
CBA D2
D3
3(S-8) ---
[7]
IR Sensor
CBA D2
D3
(S-9) ---
[3] Inverter CBA
[5] LCD Main CBA &
Liquid Crystal Panel
Unit
[4] Main CBA
[1] Rear Cabinet
[8] Speaker (s)
[2] Jack Holder
[7] IR Sensor CBA
[9] Front Cabinet
[6] Function CBA
[8] Speaker (s) D2 6(S-10) ---
[9]
Front
Cabinet
D2 --------------- ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
Step/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Unclamp/
Desolder
Note