130
Others
Troubleshooting (Cont’d)
Symptom
Solution
P
O
W
E
R
The power does not turn on.
• Check that the AC power cord is connected securely.
• Batteries of the remote control are weak.
• If above solutions do not work, press
RESET
on the front panel
with a sharp pointed object to re-start the unit. (See page
10
.)
The unit turns on automatically without
any operation.
• During Auto Clock Setting, the
POWER Light
lights up.
• The unit turns on automatically 3 minutes before the Timer
Recording.
The power turns off automatically .
• The power turns off automatically when abnormality is
detected on the disc. Press
POWER
or
OPEN / CLOSE
A
to open the disc tray, and before it is opened completely, press
the button again. Then take out the disc.
• The power turns off automatically when an OTR is completed.
• There is a possibility that the safety device is working. Try
pressing
RESET
on the front panel with a sharp pointed object
to re-start the unit. (See page
10
.)
The OSD Language Setting Menu appears
every time the power turns on.
• Finish up the Language Setting procedure by selecting a
language in the OSD Language Setting Menu. Press
ENTER
to
activate the setting.
Symptom
Solution
G
E
N
E
R
A
L
The unit does not function.
• or error message appears if the operation is prohibited.
• Batteries of the remote control are weak or exhausted
• There is a possibility that the safety device is working. Try
pressing
RESET
on the front panel with a sharp pointed object
to re-start the unit. (See page
10
.)
Clock Setting and Channel Setting cannot
be performed.
• If a Timer Recording is in standby or if a recording is in
progress, these operations cannot be performed. Delete timer
programs or stop the recording.
No picture, sound or menu appears on
the screen.
• Check if the connections are made securely and correctly.
• Check if the cables are not damaged.
• Check if a correct external input channel is selected on your
TV. (See page
1
8.)
• Check if you have comleted the Channel Setting.
The unit does not operate properly.
• Moisture has condensed inside the unit. Remove the disc and
leave the unit turned on for about two hours until the moisture
evaporates.
(See page
4.
)
The abnormal display appears
in the Front Panel Display.
• There is a possibility that the safety device is working. Try
pressing
RESET
on the front panel with a sharp pointed object
to re-start the unit. (See page
10
.)
121-137.qx3 05.12.15 2:14 PM Page 130