– 15 –
EN
0C28
– 15 –
– 15 –
DEGAUSSING
Magnetism from nearby appliances and speakers
might affect the color of the TV picture.
If this happens, move this unit away from the appli-
ance. If the color is still not correct, disconnect power
cord from AC outlet then reconnect it after 30 minutes.
WATCHING A TV PROGRAM
1
Turn on the TV/DVD
Press POWER to turn on the TV/DVD.
2
Select the channel number
Press CHANNEL(CH.)
K
or
L
to select your desired
channel number or press Number on the remote con-
trol.
Note for using the Number on the remote control:
¡
When selecting cable channels which are higher
than 99, press +100 first, then, press the last two
digits. (Example: to select channel 125, first press
“+100” then press “2” and “5”).
¡
You must precede single-digit channel numbers
with a zero (For example: 02, 03, 04 and so on).
Remember:
¡
If the TV/DVD is connected to a cable box or
satellite box, the TV/DVD must be on CH3 or
CH4, then the channel to be viewed must be select-
ed on the cable box or satellite box.
3
Adjust sound
Press VOLUME(VOL.)
X
X
or
Y
Y
to
adjust the volume.
NOTE:
•
If you press the CHANNEL(CH.)
o
or
p
in the
DVD mode, you can change the TV channels.
Even if you turn off the TV/DVD in the DVD
mode, when you turn it on again, it will go into the
TV mode.
TV
s
B
BRIGHT
to decrease
to increase
brightness
brightness
CONTRAST
to decrease
to increase
contrast
contrast
COLOR
to pale
to brilliant
TINT
to purple
to green
SHARPNESS
to soft
to clear
PICTURE CONTROL
The TV/DVD’s picture controls – BRIGHT, CON-
TRAST, COLOR, TINT and SHARPNESS – are
preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a natural looking image.
Make sure ...
•
TV/DVD power must be turned on.
1
Select “PICTURE CONTROL”
Press PICTURE on the remote control.
2
Select item you want to adjust
Press
K
or
L
until desired control is displayed.
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
3
Adjust the picture control
Press
B
or
s
to adjust to your desired level within
5 seconds.
NOTE:
•
At step 3, the picture adjustment display will disap-
pear from the TV screen after about 5 seconds
unless you press any buttons, even though you may
not be finished. In this case, repeat from step [1].
TV
•
If there is a power failure of any kind, the unit will
retain its memory for this feature.
VOLUME
20
C C C C C C
C C C C C C C C C C
BRIGHT
–
P
P P
P P
P P
P P
P P
P P
P C
C P
P P
P P
P P
P P
P P
P P
P
+
TV OPERATION
TD811HB(EN).qx33 03.9.2 3:50 PM Page 15
Summary of Contents for EWC20D3
Page 39: ......
