background image

– 20 –

EN

0C28

– 20 –

– 20 –

– 20 –

BASIC PLAYBACK

Getting started

¡

Turn on the power of amplifier and any other com-
ponents, if necessary. 

1   

Press POWER.

¡

The power will turn on.

2   

Press OPEN/CLOSE to open disc loading
tray.

3   

Place the chosen disc in the tray, with the
label facing up.

CD

DVD-V

PLAYING A DISC

4   

Press PLAY.

¡

The tray will close automatically, and playback will
then start from the first chapter or track of the disc.
If the playback does not start automatically, press
PLAY.

¡

When you playback the DVD which a title menu is
recorded, it may appear on the screen. In this case,
refer to “TITLE MENU”.

5   

Press STOP to stop playback.

NOTES

¡

When the DVD mode has been switched to the TV
mode, the DVD mode shuts down first and then TV
picture and sound appears in about 4 seconds.
Similarly, when POWER is pressed to turn off in the
DVD mode, this mode shuts down first and then the
TV/DVD’s power is turned off.

¡

A “prohibited icon” may appear at
the top-right on the TV screen dur-
ing operation, warning that a pro-
hibited operation has been encoun-
tered by the DVD or the disc.

¡

With DVDs that use titles for playback program sig-
nals, playback may start from the second title, or it
may skip these titles.

¡

During the playback of a two layered disc, pictures
may stop for a moment. This happens when the 1st
layer switches to the 2nd layer. This is not a mal-
function.

GENERAL FEATURES

DVD may contain menus to navigate the disc and
access special features. Press appropriate numerical
key or use Arrow (

L

/

K

/

B

/

s

) to highlight your selec-

tion in the DVD main menu and press ENTER to con-
firm.
NOTES

¡

Select DVD mode by pressing SELECT on the

remote control. Then, press PLAY or OPEN/CLOSE
before you operate the DVD functions.

¡

Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.

TITLE MENU

1   

Press TITLE.

¡

The title menu will appear.

2   

If the feature is not available,

symbol

may appear on the TV screen.

3   

Press Arrow (

L

/

K

/

B

/

s

) to select an item,

and ENTER to confirm selection.

DVD-V

DISC MENU

1   

Press DISC MENU.

¡

The DVD main menu will appear.

2   

If the feature is not available,

symbol

may appear on the TV screen.

3   

If disc menu is available on the disc, audio
language, subtitle options, chapters for the
title and other options will appear for selec-
tion.

4   

Press Arrow (

L

/

K

/

B

/

s

) to select an item,

and ENTER to confirm selection.

DVD-V

CALLING UP A MENU SCREEN
DURING PLAYBACK

For DVD-Vs

¡

Press DISC MENU to call up the DVD menu.

¡

Press TITLE to call up the title menu.

NOTE

¡

Contents of menus and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.

TD811HB(EN).qx33  03.9.2  3:50 PM  Page 20

Summary of Contents for EWC20D3









































Reviews: