SETTING THE CLOCK (CONTINUED)
23
Press the MENU key to save the selectings you
have made.
7
NOTE:
There is no need to set day of the week because it is automatically set according to the DATE.
You can correct preset contents by pressing CLEAR key on the remote control.
Clock setting is possible when the TIMER indicator is on the display panel (Timer Standby mode).
First check to see that the TIMER indicator on the display panel is not lit.
"--:--" (initial condition of display) also means that there has been a power failure or disconnection
of the power plug. Readjusting the time according to the above steps restores the normal condi-
tion of the clock display.
Time 07:11 PM
Date 07/10/00 (Mon)
CLEAR Correct
MENU Set
TIME AND DATE SET
Press the number key 2 in the CLOCK SET mode to select turn AUTO DST
ON or OFF.
• Select ON if you want the VCR’s clock to automatically adjust for daylight-
saving time.
• Select OFF if you do not want the VCR’s clock to adjust for daylight-saving
time.
SET DAYLIGHT-SAVING TIME
MENU Exit
CLOCK SET
1 Time and Date Set
2 Auto DST : ON
NOTE:
Spring Forward ; Fall backward
In the Spring, daylight-saving time begins on the first Sunday in April. Because the clock automatically
changes from 2:00 AM to 3:00 AM (forward on hour), remember to include the extra hour for timer-
recording falling within this time frame.
In the Autumn,daylight-saving time ends on the last Sunday in October.
The VCR clock automatically changes from 2:00 AM to 1:00 AM (back one hour). Therefore, it can affect
your recording length.
