background image

VIDEO CASSETTE

Push the cassette into the cassette compartment gently with
label up.

AUTOMATIC POWER ON
The VCR will turn on automatically. 

AUTOMATIC PLAY
When loading a tape without the erase prevention tab intact, 
playback will start immediately.
An inverted video cassette cannot be inserted.

Press the STOP/EJECT key on the VCR twice.
The first press will stop the tape and the second press will
eject the tape.
Press the EJECT key on the remote control.

Pull the cassette out gently.

* When you press the STOP/EJECT key even if the power is 

off, the cassette will be ejected.

LOADING 

UNLOADING

16

NOTES:
• An inverted cassette cannot be inserted.
• Be sure to insert the cassette firmly into the slot, otherwise, it will be automatically ejected.
• The automatic loading mechanism will operate only when the cassette is inserted correctly.
• When the unit is not plugged into a power outlet, do not insert cassette.

CAUTION:
•Do not attempt to pull out the cassette once automatic loading has started.
•Do not insert fingers or any foreign object beyond the door flaps of the cassette loading slot as this 

could lead to injury or damage to the mechanism.

•Do not allow children to insert any foreign objects into VCR.

Summary of Contents for EV477
















































Reviews: