background image

Enardo DFA Series

Facebook.com/EmersonAutomationSolutions
LinkedIn.com/company/emerson-automation-solutions
Twitter.com/emr_automation

[email protected]

Outside North 

America Only

D103810X012 © 2015, 2019 Emerson Process Management Regulator 

Technologies, Inc. All rights reserved. 01/19.  

The Emerson logo is a trademark and service mark of Emerson  

Electric Co. All other marks are the property of their prospective owners. 

Fisher™ is a mark owned by Fisher Controls International LLC, a 

business of Emerson Automation Solutions.
The contents of this publication are presented for information purposes

only, and while effort has been made to ensure their accuracy, they are 

not to be construed as warranties or guarantees, express or implied, 

regarding the products or services described herein or their use or 

applicability. All sales are governed by our terms and conditions, which 

are available on request. We reserve the right to modify or improve the 

designs or specifications of our products at any time without notice.

Emerson Process Management Regulator Technologies Tulsa, LLC 

does not assume responsibility for the selection, use or maintenance of 

any product. Responsibility for proper selection, use and maintenance of 

any Emerson Process Management Regulator Technologies Tulsa, LLC 

product remains solely with the purchaser.

Emerson Automation Solutions

Americas

 

McKinney, Texas 75070 USA 

T   +1 800 558 5853 

+1 972 548 3574

Tulsa, OK 74146 USA 

T  +1 918 662 6161

Europe

 

Bologna 40013, Italy 

T  +39 051 419 0611

Asia Pacific

 

Singapore 128461, Singapore 

T  +65 6777 8211

Middle East and Africa 

Dubai, United Arab Emirates 

T  +971 4 811 8100

Enardo.com

Summary of Contents for Enardo DFA Series













Reviews: