manualshive.com logo in svg

Emerson Dosaodor-D, V

Share
Download
Emerson Dosaodor-D V Download Page 3

Dosaodor-D

3

CHARACTERISTICS

Electronic Control Unit

Construction material 

: 10/10 mm steel plate

Finish 

: RAL 7032 grey epoxy powder coat

Door 

: Lockable with window

Installation 

: Wall mount

Weight 

: 22 kg (49 lbs) (medium complexity configuration)

Power supply options 

: 12Vdc+/-15% - 115 Vac 60Hz - 230 Vac 50Hz

Electromagnetic interference 

: Consistent with 89/336/CE standard

Humidity 

: 10% – 90% non-condensing

Input signals

Calibration cylinder high level 

: Discrete (EExi)

Calibration cylinder low level 

: Discrete (EExi)

Flow Computer alarm signal 

: Discrete

Flow Computer instantaneous flow rate 

: Pulse (max 1 Hz)

Flow Computer instantaneous flow rate 

: Analog (4-20 mA)

Output signals

Injection solenoid valve control (Primary) 

: Discrete (12 Vdc EExe)

Injection solenoid valve control (Secondary, B.2 only) 

: Discrete (12 Vdc EExe) 

Calibration cylinder refill valve 

: Discrete (12 Vdc EExe)

Emergency circuit control 

: Discrete (12 Vdc EExe)

Injected odorant 

: Pulse (1 Hz)

Distributed gas volume 

: Pulse (1 Hz)

Injector failure (Primary) 

: Discrete

Injector failure (Secondary, B.2 only) 

: Discrete

Emergency circuit enabled 

: Discrete (Also indicates that the Dosaodor-D unit is in disabled mode)

Odorant tank level 

: Discrete

Instantaneous odorant concentration 

: Analog (4-20 mA)

Daily odorant concentration 

: Analog (4-20 mA)

Communication ports

One RS-232 serial port is available for local configuration or 

connected to an GSM/GPRS modem.

Display

Back-lit alphanumeric 4 line by 40 character LCD.

Operative modes

OFF – MANUAL – AUTOMATIC – WASHING all selectable by 

appropriate function keys.  
Operation INJECTOR 1 - INJECTOR 2 - INJECTOR 1-2  
(with B.2 option only).

Configuration protection

Keyed switch for configuration mode selection and battery 

backed memory to maintain internal configuration data in the 
event of power failure.

Optional integrated printer

Dot matrix, 42 characters/line, allows for a local hard copy of 

alarms, operating history and reports.

Summary of Contents for Dosaodor-D













































Reviews:

No comments

Brands by name

Popular brands

Load more brands