manualshive.com logo in svg

Emerson Daniel 788DVC, User Manual

Share
Download
Emerson Daniel 788DVC User Manual Download Page 3

Flow Lifecycle Services for Daniel products

Location

Telephone number

Fax number

North America/Latin America

+1.713.467.6000

+1.713.827.4805

Flow Lifecycle Services for Daniel products

+1.713.827.6314

+1.713.827.6312

USA (toll free)

+1.888.356.9001

+1.713.827.3380

Asia Pacific (Republic of Singapore)

+65.6777.8211

+65.6777.0947.0743

Europe (Stirling Scotland, UK)

+44 (0)1786.433400

+44 (0)1786.433401

Middle East Africa (Dubai, UAE)

+971 4 8118100

+971 4 8865465

Daniel Measurement and Control, Inc. (Headquarters)
11100 Brittmoore Park Drive
Houston, TX 77041 USA

http://www.emerson.com

Email

•

Customer Service: [email protected]

•

Customer Support: [email protected]

•

Field Lifecycle Services: [email protected]

•

Asia-Pacific: [email protected]

•

Europe: [email protected]

Return Material Authorization (RMA)

A Return Material Authorization (RMA) number must be obtained prior to returning any equipment for any reason. Access and
fill in the RMA form for Daniel products clicking on the link below.

http://go.emersonprocess.com/RMAOnlineForm

Signal words and symbols

Pay special attention to the following signal words, safety alert symbols and statements:

Safety alert symbol

This is a safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.

 

DANGER

Danger indicates a hazardous situation which, if not avoided, will result in death or serious injury.

 

WARNING

Warning indicates a hazardous situation which, if not avoided, could result in death or serious injury.

 

CAUTION

Caution indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE

Notice is used to address safety messages or practices not related to personal injury.

3

Summary of Contents for Daniel 788DVC































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands