Emerson CopeLand CoreSense 571-0064-05 Application Engineering Bulletin Download Page 2

Page: 2 / 19

AE8-1384 R1

Application Engineering

Safety Instructions

Copeland Scroll

™

compressors with CoreSense

™

Communications are manufactured according to the latest

U.S. and European Safety Standards. Particular emphasis has been placed on the user's safety. Safey icons are

explained below and safety instructions applicable to the products in this bulletin are grouped on page 3. These

instructions should be retained throughout the lifetime of the compressor.

You are strongly advised to follow

these safety instructions.

Safety Icon Explanation

DANGER indicates a hazardous situation which, if not avoided, will result
in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.

CAUTION, used with the safety alert symbol, indicates a hazardous
situation which, if not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not related to personal injury.

CAUTION, without the safety alert symbol, is used to address practices
not related to personal injury.

DANGER

WARNING

CAUTION

NOTICE

CAUTION

Summary of Contents for CopeLand CoreSense 571-0064-05




















Search results

Summary of Contents for CopeLand CoreSense 571-0064-05

Reviews:

Related manuals for CopeLand CoreSense 571-0064-05

Brands by name

Popular brands

Emerson CopeLand CoreSense 571-0064-05, Application Engineering Bulletin

Search results

Summary of Contents for CopeLand CoreSense 571-0064-05

Reviews:

Related manuals for CopeLand CoreSense 571-0064-05

Brands by name

Popular brands