3. Ceiling Fan Assembly
(Continued)
10
ETL Model No.: CF880L
DOWNROD
GROMMET
COUPLER
COVER
FAN MOTOR
HOUSING
3.14
Make sure the Grommet is properly installed in the
Coupler Cover, then slide the Coupler Cover on the
Downrod until it rests on the Fan Motor Housing
(Figure 12).
Figure 12
DOWNROD
MOTOR
COUPLER
REINSTALL
SET SCREWS (2)
3.13
While pulling up on the 4.5” Downrod, retighten the Set
Screws in the Motor Coupler to secure the Downrod
into place (Figure 11).
NOTE: The Set Screws must be properly installed
as described above, or fan wobble could result.
It is critical that the set screws are securely tightened.
Failure to verify that the set screws are properly
installed could result in the fan falling.
WARNING
!
Figure 11
