background image

27

emersonfans.com

Please contact 1-800-654-3545 for further assistance

ETL Model No.: CF717-1

What The Limited Warranty Covers:

This limited warranty is offered by Air Comfort Products division of Emerson Electric Co. (

"Emerson" "we"

or 

"us"

) located at the address stated below to the original

retail  purchaser  (

"you"

or 

"your"

)  of  an  Emerson  Air  Comfort  Ceiling  Fan  product  (

"Emerson  Ceiling  Fan"

)  and  covers  the  motor  and  the  other  components  and

accessories of the Emerson Ceiling Fan against all defects in workmanship and materials.

What The Period Of Coverage Is:

This limited warranty will cover the Emerson Ceiling Fan motor for the expected lifetime of your Emerson Ceiling Fan (when operated in accordance with your Owner's

Manual or other instructions provided by Emerson to you with the Emerson Ceiling Fan). All other components and accessories of the Emerson Ceiling Fan are covered

by  this  limited  warranty  for  a  period  of  one  (1)  year  from  its  date  of  original  retail  purchase.  ANY  IMPLIED  WARRANTY,  INCLUDING  WITHOUT  LIMITATION,  ANY

IMPLIED  WARRANTY  OF  MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR  PURPOSE  THAT  IS  AVAILABLE  TO  YOU  UNDER  THE  LAWS  OF  YOUR  STATE  OR

PROVINCE  SHALL  COVER  THE  MOTOR  FOR  THE  EXPECTED  LIFETIME  OF  THE  MOTOR  (SUBJECT  TO  PROPER  USE),  AND  FOR  ONE  YEAR  WITH  RESPECT  TO

COMPONENTS AND ACCESSORIES.

No Other Express or Implied Warranty Applies:

THE  LIMITED  WARRANTIES  PROVIDED  ABOVE  ARE  THE  SOLE  AND  EXCLUSIVE  WARRANTIES  PROVIDED  BY  EMERSON  TO  YOU  FOR  YOUR  EMERSON  CEILING

FAN, AND ARE IN LIEU OF ALL OTHER WARRANTIES, WRITTEN OR ORAL, EXPRESS OR IMPLIED, WHETHER ARISING BY OPERATION OF LAW OR OTHERWISE,

WHETHER  OR  NOT  THE  PURPOSE  HAS  BEEN  DISCLOSED  AND  WHETHER  OR  NOT  THE  EMERSON  CEILING  FAN  HAS  BEEN  SPECIFICALLY  DESIGNED  OR

MANUFACTURED  FOR  YOUR  USE  OR  PURPOSE.  EMERSON  HEREBY  DISCLAIMS  ANY  AND  ALL  IMPLIED  WARRANTIES,  INCLUDING  WITHOUT  LIMITATION,

IMPLIED  WARRANTIES  OF  MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR  PURPOSE  FOR  COMPONENTS  AND  ACCESSORIES  AS  OF  THE  EXPIRATION  OF

THE  ONE  YEAR  WARRANTY  PERIOD  FOR  SUCH  COMPONENTS  AND  ACCESSORIES.  IMPLIED  WARRANTIES  OF  MERCHANTABILITY  OR  FITNESS  FOR  A

PARTICULAR  PURPOSE  FOR  THE  MOTOR  PORTION  OF  THE  EMERSON  CEILING  FAN  ARE  LIKEWISE  DISCLAIMED  BY  EMERSON  AT  SUCH  TIME  THAT  THE

EXPECTED  LIFETIME  OF  THE  EMERSON  CEILING  FAN  UNDER  NORMAL  USAGE  HAS  BEEN  REACHED.    EXCLUSIONS  OR  LIMITATIONS  OF  IMPLIED  WARRANTIES

MAY VARY FROM STATE TO STATE AND PROVINCE TO PROVINCE SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

What We Will Do To Correct Problems:

If during the one (1) year warranty period the motor or any component or accessory of your Emerson Ceiling Fan is defective in materials or workmanship, or if during

the  expected  lifetime  of  the  Emerson  Ceiling  Fan  (when  used  in  accordance  with  the  User  Manual  or  other  instructions)  the  motor  is  defective  in  materials  or

workmanship,  you  must  contact  Emerson  during  the  applicable  warranty  period.  If  the  defect  is  covered  by  warranty,  Emerson  will  repair  or  replace  the  defective

motor, component or other accessory at no charge to you. If repair of the motor, component or accessory is not practical or possible within a reasonable time and no

replacement Emerson Ceiling Fan can be provided, Emerson will refund to you the actual purchase price of your Emerson Ceiling Fan. We will ship the repaired or the

replacement Emerson Ceiling Fan to you at no charge, but you are responsible for all costs of removal and reinstallation of your Emerson Ceiling Fan.

How You Can Receive Warranty Service:

You  must  be  the  original  retail  purchaser  and  have  proof  of  your  purchase  of  the  Emerson  Ceiling  Fan  to  obtain  your  remedy  under  this  limited  warranty.  You  can

return your Emerson Ceiling Fan to your place of purchase, or you can call Emerson Customer Service at 1-800-237-6511 to obtain a return authorization and service

identification tag. In order for us to confirm that your Emerson Ceiling Fan is still under warranty, please retain your receipt or other proof of purchase and have that

information  readily  available  when  returning  your  Emerson  Ceiling  Fan  to  your  place  of  purchase,  or  upon  calling  Emerson  Customer  Service.  If  you  call  Emerson

Customer  Service,  prior  to  your  call  please  be  prepared  to  provide  all  model  numbers  shown  on  your  Emerson  Ceiling  Fan.  Once  we  have  processed  your  return

authorization request, we will provide you with a postage paid return label which should be affixed to the Emerson Ceiling Fan package you ship to the address listed at

the end of this limited warranty. The return label will be sent to the mailing address you provide to us by phone. 

What Is Not Covered:

This limited warranty does not extend to and expressly excludes:

The glass globes and light bulbs of your Emerson Ceiling Fan, 

Loss or damage to the motor or any component or accessory caused by normal wear and tear, rather than due to defects in materials or workmanship,

Loss or damage resulting from conditions beyond our reasonable control, including without limitation, repairs not made at our factory or authorized service center,

use of parts or accessories not provided to you as part of this warranty by our factory or authorized service center, mishandling, unreasonable use, misuse, abuse,

modifications or other damage caused by you or a third party to your Emerson Ceiling Fan while not in our possession, 

Loss or damage resulting from improper installation, or other failure to comply with instructions in your Owner's Manual.

This limited warranty is deemed null and void upon the occurrence of either of the following events:

You cease to own the Emerson Ceiling Fan product, or

The Emerson Ceiling Fan is moved from its original point of installation.

This limited warranty is only valid within the 50 United States, the District of Columbia, and Canada. No other written or oral warranties apply, and no employee, agent,

dealer or other person is authorized to give any warranties on behalf of Air Comfort Products or Emerson Electric Co.

Limitation of Liability

REPAIR, REPLACEMENT OR A REFUND ARE THE EXCLUSIVE REMEDIES AVAILABLE TO YOU UNDER THIS LIMITED WARRANTY. TO THE EXTENT PERMITTED BY

LAW,  IN  NO  EVENT  SHALL  EMERSON  OR  ANY  EMERSON  AUTHORIZED  DEALER  BE  LIABLE  FOR  ANY  INCIDENTAL,  SPECIAL,  INDIRECT,  OR  CONSEQUENTIAL

DAMAGES,  INCLUDING  ANY  ECONOMIC  LOSS,  WHETHER  RESULTING  FROM  NONPERFORMANCE,  USE,  MISUSE  OR  INABILITY  TO  USE  THE  EMERSON  CEILING

FAN OR FOR THE NEGLIGENCE OF EMERSON OR AN EMERSON AUTHORIZED DEALER. EMERSON SHALL NOT BE LIABLE FOR DAMAGES CAUSED BY DELAY IN

PERFORMANCE  AND  IN  NO  EVENT,  REGARDLESS  OF  THE  FORM  OF  THE  CLAIM  OR  CAUSE  OF  ACTION  (WHETHER  BASED  IN  CONTRACT,  INFRINGEMENT,

NEGLIGENCE,  STRICT  LIABILITY,  OTHER  TORT  OR  OTHERWISE),  SHALL  EMERSON'S  OR  ANY  EMERSON  AUTHORIZED  AGENT'S  LIABILITY  TO  YOU  OR  ANY

INDIVIDUAL USING THE EMERSON CEILING FAN EXCEED THE PRICE PAID BY THE ORIGINAL OWNER FOR THE EMERSON CEILING FAN. The term "consequential

damages" shall include, but not be limited to, loss of anticipated profits, business interruption, loss of use or revenue, cost of capital or loss or damage to property or

equipment.

How State and Provincial Law Relates To The Warranty:

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages so the above exclusion or limitation may not apply to you.

This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.

Emerson Air Comfort Ceiling Fan Limited Warranty

BP7483-2 ASHLAND CF717.qxp_BP7483  12/15/15  9:56 AM  Page 27

Summary of Contents for CF717BS01





























Reviews: