12. Installation of Light Kit Assembly
12.2
Remove the three switch housing plate screws and retain
for future use. (Figure 29).
SWITCH HOUSING
PLATE
REMOVE & RETAIN
SWITCH HOUSING
PLATE SCREWS (3)
Figure 29
12.1
Engage the color-coded connector of the light kit assembly
with the motor connector (Figure 28).
The two connectors are keyed and color-coded and must
be mated correctly (color-to-color) before they can be
engaged.
Make sure the connector latch closes properly.
LIGHT KIT
ASSEMBLY
COLOR-CODED
CONNECTOR
MOTOR COLOR-
CODED CONNECTOR
Figure 28
REINSTALL SWITCH
HOUSING PLATE SCREWS (3)
LIGHT KIT
ASSEMBLY
Figure 30
12.3
Align the light kit assembly holes with the switch housing
plate holes.
Carefully tuck all the wires and connectors into the switch
cup housing.
Secure the light kit assembly by reinstalling the three
previous removed screws (Figure 30).
To avoid possible fire or shock, do not pinch wires
between the light kit assembly and the switch cup plate.
WARNING
!
18
ETL Model No.: CF717-1
BP7483-2 ASHLAND CF717.qxp_BP7483 12/15/15 9:55 AM Page 18
