7
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF370
3. Ceiling Fan Assembly
(Continued)
PHILLIPS HEAD SET SCREW (LOOSENED)
HANGER BALL
4.5" DOWNROD
PIN
GREEN GROUND WIRE
Figure 5
3.5
Carefully turn the partially assembled Ceiling Fan right
side up and place the Fan securely into the packing
styrofoam. Careful not to bend the Blades.
Remove the Hanger Ball by loosening the Phillips Head
Set Screw in the Hanger Ball until the Ball falls freely
down the 4.5” Downrod (Figure 5).
Remove the Pin from the 4.5” Downrod, then remove
the Hanger Ball (Figure 5).
Retain the Pin and Hanger Ball for reinstallation in
Step 3.12.
Note: Do not loosen the Screw that attaches the
Green Ground Wire to the Hanger Ball.
4.5" DOWNROD
THREE 80" MOTOR
WIRES (UNTWISTED)
Figure 6
3.6
Separate, untwist and unkink the Three 80” Motor
Wires.
Route the Three 80” Black, Blue, and White Motor
Wires through the 4.5” Downrod (Figure 6).
MOTOR
COUPLER
DOWNROD
LOOSEN SET
SCREWS (2)
Figure 7
3.7
Loosen the Two Phillips Head Set Screws in the Motor
Coupler for installation of the 4.5” Downrod (Figure 7).
Seat the 4.5” Downrod in the Motor Coupler (Figure 7).
Rotate and align the Two Downrod Clevis Pin Holes
with the Two Motor Coupler Clevis Pin Holes (Figure 7).