16
U.L. Model No.: 52-ANT
6.1
Restore Electrical Power to the Outlet Box by turning
the Electricity on at the Main Fuse Box.
Check the operation of the Fan by gently pulling on the
Pull Chain Switch.
All Fans are shipped from the factory with the
Reversing Switch positioned to the “left” circulate air
downward. If airflow is desired in opposite direction,
turn your Fan OFF and wait for the Blades to stop
turning, then slide the Reversing Switch to the “right”
position, and turn Fan ON again (Figure 22).
The Fan Blades will turn in the opposite direction and
reverse the airflow.
Reverse Switch Information
Season Rotation Direction Switch Position
Summer Counter-Clockwise Left
Winter Clockwise Right
6.2
Cut the 3-Speed Switch Pull Chain to a desired length
(optional). Connect the Wood Pendant (supplied) to the
3-Speed Switch Pull Chain by sliding the Wooden
Pendant (small hole first) onto the Pull Chain
(Figure 23). Attach the Chain Coupler to the end of the
Chain and allow the Wooden Pendant to fall down over
the Coupler.
Your Fan model is equipped with a 4-position,
3-Speed Pull Chain Switch (Figure 23). The operating
sequence is as follows:
Three-Speed
1st Pull—HIGH
2nd Pull—Medium
3rd Pull—Low
4th Pull—OFF
6. Using Your Ceiling Fan
REVERSING
SWITCH
SWITCH
HOUSING
ASSEMBLY
3-SPEED SWITCH
PULL CHAIN
WOODEN PENDANT
CHAIN COUPLER
Figure 23
Figure 22
To reduce the risk of fire or electrical shock, do not
use this fan with any solid-state speed control device.
WARNING
!
Summary of Contents for Builder CF700BS09
Page 22: ...22 U L Model No 52 ANT Notes ...
Page 46: ...46 No de modelo U L 52 ANT Notas ...