15
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: 52-ANT
5. How to Wire Your Ceiling Fan
(Continued)
CEILING COVER
LOCKWASHERS (2)
THREADED STUDS (2)
KNURLED KNOBS (2)
Figure 21
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
WARNING
!
5.6
Lift the Ceiling Cover up to the Threaded Studs and
turn until Studs protrude through the Holes in the
Ceiling Cover (Figure 21).
5.7
Secure the Ceiling Cover in place by sliding a
Lockwasher (supplied) and installing a Knurled Knob
(supplied) over each threaded stud (Figure 21).
Tighten the Knurled Knobs securely until the Ceiling
Cover fits snugly against the ceiling and the Hole in the
Ceiling Cover is clear of the Downrod.
5.5
Screw the two Threaded Studs (supplied) into the
Tapped Holes in the Hanger Bracket (Figure 20).
THREADED
STUDS (2)
Figure 20
Summary of Contents for Builder CF700BS09
Page 22: ...22 U L Model No 52 ANT Notes ...
Page 46: ...46 No de modelo U L 52 ANT Notas ...