Installation, Operation and Maintenance Manual
VCIOM-17114-EN Rev. 1
August 2022
3
Installation
Section 2: Installation
Section 2: Installation
To assemble the OM13 into the SCE300 actuator, proceed as follows:
•
Ensure that all the parts received with the OM13 are available as described in
Section 4.
•
Using Section 4, select only mechanical parts (screws and spacers) depending on
actuator models.
•
Gather the right tools for the assembly and for setting the actuator controls.
•
With an Allen wrench of 5 mm, unscrew the cover screws as shown in Figure 1.
•
Remove the actuator cover as shown in Figure 2.
Figure 2
Figure 1
Follow one of the following assembling procedures depending on actuator model.
