Installation, Operation and Maintenance Manual
VCIOM-17114-EN Rev. 1
August 2022
21
Installation
Section 2: Installation
•
Remove the 3-wire power connector cable from the power card as seen in Figure 41.
•
Screw the 3 spacers and unscrew the screw that fixes the motor cable as seen in
Figure 42.
Figure 41
Figure 42
•
Place the OM13 card onto the spacers and tighten the 4 screws as seen in Figure 43.
•
Reconnect the 8-pins connector cable, the 4-pins connector black cable and the
4-pins connector white cable as seen in Figure 44.
spacers
screw
