21
Installation, Operation and Maintenance Manual
VCIOM-15792-EN Rev. 0
October 2020
Section 3: Operation and Use
Operation and Use
Figure 15
Cam adjustment
If the index (Figure 16), does not signal the proper position of the valve but is turned by 90°:
•
Remove the roll pin placed on the position indicator (index).
•
Turn the indicator until reaching its proper positioning.
•
Put the roll pin back in its position.
NOTICE
End of stroke micro-switches should be operated before the stop of the stroke of the
actuator due to mechanical stops. Adjust the relative cams properly.
Figure 16
Position indicator and pin for micro-switches box
Positon indicator
(index)
Pin
