Installation, Operation and Maintenance Manual
XXXXXXXX Rev. 1
July 2016
14
Section 7: Disassembly and Reassembly
Disassembly and Reassembly
7.4
Removal of Worm Wheel
•
Remove the worm wheel by lifting it from the gearbox housing.
•
Replace and lubricate the ‘O’ rings in the housing before reassembling the worm
wheel.
Figure 12
Removing the Worm Wheel
7.5
Reassembly of AT Series Gearbox
•
In reassembly of the AT Series gearbox, follow all above steps in reverse order.
•
Be sure to lubricate all mating / rotating parts with grease
•
Ensure to provide a liquid sealant on both covers and housing
