16
ETL Model No.: CF717
11. Installation of Light Kit Assembly
(continued)
11.4
Position the fan speed control switch pull chain through
the side hole of the light kit fitter plate (Figure 26).
NOTE:
Be sure that the fan switch chain does not
make contact with the light bulbs. If necessary
reposition the light fitter to avoid the fan switch
chain from touching the light bulbs.
SPEED CONTROL
PULL CHAIN
LIGHT KIT
FITTER PLATE
Figure 26
11.5
Position the light switch pull chain through the center
hole of the glass shade.
Position the speed control switch pull chain through the
center hole of the glass shade.
NOTE:
Be sure that the fan switch chain does not
make contact with the light bulbs. If necessary
reposition the light fitter to avoid the fan switch
chain from touching the light bulbs.
Place the glass shade onto the light kit assembly
threaded nipple (Figure 27).
SPEED
CONTROL
PULL CHAIN
LIGHT SWITCH
PULL CHAIN
GLASS
SHADE
THREADED NIPPLE
Figure 27
11.6
Pass the light pull chain through the center bushing in
the bowl cap.
Pass the speed control switch pull chain through the
offset hole of the bowl cap.
Place the bowl cap on the threaded nipple and against
the glass shade (Figure 28).
Install finial nut finger tight to secure the bowl cap to the
glass shade (Figure 28).
BOWL CAP
FINIAL NUT
GLASS
SHADE
Figure 28
BP7483 ASHLAND CF717 12/19/13 9:59 AM Page 16
