13
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF717
CEILING
COVER
TIGHTEN
SCREW
INSTALL SCREW
AND WASHER
Figure 19
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box
and not pinched between the ceiling cover and the
ceiling.
WARNING
!
9.2
Lift the ceiling cover up to the hanger bracket. Engage
the slots in the ceiling cover with the loosened screws
in the bracket and turn the cover counterclockwise
(Figure 19). Be sure that the lockwashers are between
the screw heads and the ceiling cover.
Install the other two screws and lockwashers; tighten all
screws securely
9. Installation of Ceiling Cover
9.1
Remove the left screw and lockwasher from each side
of the hanger bracket (Figure 18) and loosen the other
two screws.
NOTE: When installing the ceiling fan using the
close-to-the-ceiling method, carefully lift the fan
assembly from the hook on the hanger bracket and
proceed as follows.
REMOVE THIS
SCREW AND
LOCKWASHER
LOOSEN
THIS SCREW
Figure 18
BP7483 ASHLAND CF717 12/19/13 9:59 AM Page 13
