background image

This document may be photocopied for personal use. 

Visit our website at http://www.emersonclimate.com for the latest technical documentation and updates.

Join Emerson Retail Solutions Technical Support on Facebook. http://on.fb.me/WUQRnt

For Technical Support call 770-425-2724 or email [email protected]

The contents of this publication are presented for informational purposes only and they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described 

herein or their use or applicability. Emerson Climate Technologies Retail Solutions, Inc. and/or its affiliates (collectively “Emerson”), reserves the right to modify the designs or specifications of such products 

at any time without notice. Emerson does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of any product remains 

solely with the purchaser and end-user.

Document Part # 026-4159 Rev 2

Page 5 of 5

Step 4: Setting Up the Site Supervisor Web Server 

The default Web Port on the System Values screen for the Site Supervisor is 80, but if this port is changed to another value, 
you must add that value to the IP Address 192.168.1.250. For example, if the port value is changed to 

1025

, the IP Address in 

section 

Setting Up the Browser Startup Page

,

 Step 3

 would be 192.168.1.250

:1025

.

To Change to a Different Site Supervisor IP Address

1. Press top left corner of the Display to open the login screen and login using 

admin/admin

.

2. Tap 

Proceed

 and the Browser settings page will open. 

3. Repeat the procedure in 

Step 3: Setting Up the Browser Startup Page 

section.

To Change the Display’s Network Configuration

1. Press the top left corner of the Display to open the login screen and login using 

admin/admin

.

2. Tap 

Proceed 

and the Browser settings page will open. 

3. Repeat the procedure in 

Step 2: Setting Up the Display Network Configuration 

section and begin at 

part 3

.

Web Port Setup on the Site Supervisor System Values Screen

Summary of Contents for 818-7235






Reviews: