Emerson Research ES1 Owner'S Manual Download

Page: 3 / 31

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including

interference that may cause undesired operation.

• Operate controls and switches as described

in the manual.

• Before turning on the power, make certain

that the connecting cords, if any, and power

cord are properly installed.

• When moving the set, be sure to first

disconnect the power cord and remove

cords connected to other equipment.

• Avoid installing this unit in places exposed

to direct sunlight or close to heat radiating

appliances such as electric heaters, on top

of other stereo equipment tha radiates too

much heat, places lacking ventilation or

dusty areas, places subject to constant

vibration and/or humid or moist areas.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD,

DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

IMPORTANT NOTES

Summary of Contents for ES1
































Search results

Summary of Contents for ES1

Reviews:

Related manuals for ES1

Brands by name

Popular brands

Emerson Research ES1, Owner'S Manual

Search results

Summary of Contents for ES1

Reviews:

Related manuals for ES1

Brands by name

Popular brands