24
SETTING THE TIMER
This system includes a built-in timer that will automatically switch the power ‘On’ at whatever time
you select, play for the length of time you desire and then shut itself ‘Off’ automatically.
SETTING “On” TIME
Note: In order for the timer to operate correctly, the clock must also be set correctly. If you have not
yet set the clock, please refer to the instructions for setting the clock on Page 11 and set the clock
correctly before you begin setting the Timer.
You may set the Timer using either the controls on the top panel of the main unit or the keys on the
remote control handset.
1. Press the Timer/Snooze button on either the
main unit or the remote control handset to
begin setting the ‘On’ time. The TIMER
indicator appears in the display and the ON
indicator and Time display begin flashing.
2. Press the Up
button on the top panel or the Hour button on the remote control handset to
adjust the display to the desired ‘On’ hour. Be sure to observe the AM/PM indicators to confirm
that you are setting the hour correctly for AM or PM.
3. Press the Down
button on the top panel or the Minute button on the remote control handset
to adjust the Time display to the desired ‘On’ minute.
4. When the desired ‘On’ time is flashing in the
display, press the Timer/Snooze button once
more. The ON indicator disappears and the
OFF indicator begins flashing in the display.
Use the Up
/ Down
buttons on the main
unit or the Hour/Minute buttons on the remote
control handset to set the display to the
desired ‘Off’ time.
5. When the desired ‘Off’ time is flashing in the display press the Timer/Snooze button on the main
unit or the remote handset once more. The OFF indicator stops flashing and the display returns
to the correct time of day. The TIMER indicator remains in the upper left-hand corner of the
display.
