- 4 - FN-109082
PARTS DESCRIPTION
1.
Front fan guard
2.
Fan blade
3.
Base
4.
Speed buttons
ASSEMBLY
Take the screws from the bottom of the shaft. Attach the base onto the shaft of the fan. Fix it firmly with the
screws provided.
OPERATING INSTRUCTIONS
1.
Plug the power cord into a suitable socket.
2.
Switch on the fan by using the speed buttons on the control panel, i.e. “
” = off, “
” = low speed, “ ” =
medium speed, “
” = high speed.
3.
Tilting angles: You can loosen the screw on the side of the shaft to adjust the fan to your preferred elevation.
Then fasten the elevation by tightening the screw.
4.
Oscillation: to make the fan head oscillate, push down the oscillation knob on the top of the motor housing.
To stop the fan head from oscillating, pull up the oscillation knob.
CAUTION:
Press only one of the speed control button at a time. Permanent damage to the switch housing may
result if two or more of the buttons are pressed simultaneously.
CLEANING
1.
Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains cable
from the socket.
2.
Never immerse the appliance in water (danger of short-circuit).
To clean the appliance, only wipe it down
with a damp cloth and then dry it carefully. Always take out the mains plug first.
3.
Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it occasionally
using a dry brush or vacuum cleaner.
TECHNICAL DATA
Supply voltage: 220-240V ~ 50Hz
Power consumption: 50W
Eco design requirements
Product information requirements
Maximum fan flow rate (F)
80,63 m³/min
Fan power input (P)
48,16 W
