22
Emeril Lagasse Pasta & Beyond
™
Symptom
Possible Cause
Solution
The appliance does not work.
The appliance is not plugged in.
Plug the power cord into a wall socket.
After pressing the Power Button, the
appliance chimes/rings but does not work.
Some part of the appliance is
assembled incorrectly.
Ensure the assembly instructions in the “Parts &
Accessories” section have been followed correctly.
The safety switch is triggered and
the appliance has suddenly stopped or
suddenly restarts.
The front panel knob is loose.
Make sure the front panel is securely assembled.
Excessive ingredients in the pasta maker.
Remove the dough and start a new batch using
recommended measurements.
During processing, the appliance stops
working when opening the lid.
For safety reasons, the appliance always
stops working when the lid is opened
during processing.
If you need to resume the previous
operation, close the lid properly and press
the Start/Pause Button.
E1 displays on the screen
The motor is blocked.
Contact customer service.
Pasta dough is too sticky.
Cooking environment might be more
humid than the recipe assumes or too
much liquid was used.
First, try adding 1 tbsp. flour at a time to absorb
extra moisture.
Pasta dough is too dry.
Cooking environment might be less
humid than the recipe assumes or not
enough liquid was used.
Add 1 tsp. of liquid at a time until the dough
looks like coarse, wet sand.
Troubleshooting
