User manual PowerXtreme X20/X30
E18-X20X30-EN00
www.emergoplus.com
Page 18 of 25
▪
After first use or test all connections for (over) heating. Repair or
replace connections that have become too hot.
▪
Check the wiring and connections at least once a year. Immediately
rectify defects such as loose connections and burnt cables.
▪
System overview:
PAY ATTENTION!
Install a fuse and a main switch to the
power circuit according to local
regulations. Place the fuse as close as
possible to the + pole of the battery.
A = PowerXtreme X20/X30
B = Fuse
C = Main switch
D = Battery charger
Figure 5. Wiring diagram
WARNING!
Never connect the battery in parallel to another
battery, including the wiring from the car.
