EES-401 Series Ultrasonic Energy Meter
Revision: 3.0.1
Page 45 of 90
Relay Output Setup
The relay is single-pole and constant-on for external
instrument controls. The following options are
available:
0.
No Signal
1.
Poor Signal
2.
Not Ready (No*R)
3.
Reverse Flow
4.
AO Over 100%
5.
FO Over 120%
6.
Alarm #1
7.
Alarm #2
8.
Batch Control
9.
POS Int Pulse
10.
NEG Int Pulse
11.
NET Int Pulse
12.
Energy Pulse
13.
ON/OFF viaRS232
14.
Fluid changed
15.
Key Stroking ON
16.
Not Using
Flow Batch CTRL
Set the input trigger for the batch control function on
the flow meter. The following options are available:
0. Key Input
1. AI1 Raise UP
2. AI2 Raise UP
3. Via RS232
Flow Batch Controller
The internal batch controller in the Energy Meter is
able to control the input signals through keypad or
analog input Serial Port. Output signals can be
transmitted through OCT or relay.
The flow batch value can be modified in this window.
The screen will enter the batch control display as soon
as the modification completed.
Date Totalizer
The following options are available:
0.
Day
1.
Month
2.
Year
In this window, it is possible to review the historical
flow data totalizer for any day for the last 64 days, any
month for last 64 months and any year for last 5 years.
Press
, use the
or
to review
totalizer in days, months and years.
RELAY Output Setup
0. NO Signal
Flow Batch CTRL by
0.Key Input
FlowBatch Controller
1000.00 m3
Date Totalizer
[82
0. Day
06 2021-01-09
36.98 m3