13
Connection of the device to the electric network.
The EMERALD device is connected to the electric network in several stages - see Fig. 13. First
you need to connect the power supply (adapter) to the network cable. Then you need to connect the
power cable to an electrical outlet and insert the plug of the power supply into the power socket of
the EMERALD device in the upper left corner of the side of the case.
Important !
It is forbidden to disconnect a working device (in OPERATION or FLUSHING mode) from the
network by pulling the plug of the power source from the device. This can lead to malfunctioning of
the device. Disconnecting devices from the power supply should only be done by disconnecting the
power plug from the outlet.
Fig. 13 General view of connecting the EMERALD device to electrical network