Energy Saving Powerboard (ESP) – Super AV (RCIR) Model Instructions
Emerald Planet
www.emeraldplanet.com.au
Instructions for use:
INITIAL SET-UP
It is important you follow the sequence and timing of the Initial Set-Up accurately.
1.
Turn OFF all your appliances at the appliance and unplug from existing power sockets.
2.
Plug into:
Normal Socket – Any recording device or any device that you do not wish to have turned off.
E.g. Pay
TV
Master Socket – TV
Slave Sockets - Other devices you wish to save Standby Power. E.g. DVD, VCR, Amplifier etc.
3.
Ensure the infrared receiver is fixed in direct view of the TV and associated remotes.
4.
Plug the Standby Power Controller (SPC) into the wall ensuring the wall socket is TURNED OFF.
5.
All within 5 seconds;
Turn On the power at the wall socket.
Turn On the TV of your TV remote control twice.
(1
st
Press – turns SPC On, 2
nd
Press turns TV On.)
Wait for at least 2 minutes. DO NOT press any more buttons and leave your TV On. After approx. 2 minutes the IR
Receiver will flash a red light 4 times.
Set-up is successful.
(If this 4 flash does not happen, unplug the SPC from the wall, wait 1 minute and start again from step 1.)
For more information please refer to the instruction leaflet inside.
