Emcore Corporation
System 5000 series
Copyright © 2008 Emcore Corporation
MAN-5021T, Rev B
SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH
FURNISHING OF GOODS, PARTS AND SERVICE HEREUNDER, OR THE PERFORMANCE, USE OF,
OR INABILITY TO USE THE GOODS, PARTS AND SERVICE.
Emcore will not be responsible for loss of output or reduced output of opto-electronic devices if the
customer performs chip mounting, ribbon bonding, wire bonding, fiber coupling, fiber connectorization, or
similar operations. These processes are critical and may damage the device or may affect the device's
output or the fiber output.
Emcore test reports or data indicating mean-time-to-failure, mean-time-between-failure, or other reliability
data are design guides and are not intended to imply that individual products or samples of products will
achieve the same results. These numbers are to be used as management and engineering tools, and are
not necessarily indicative of expected field operation. These numbers assume a mature design, good
parts, and no degradation of reliability due to manufacturing procedures and processes.
Emcore is not liable for normal laser output degradation or fiber coupling efficiency degradation over the life
of the device.
Every attempt has been made to make this material as complete and accurate and up to date. Users are
cautioned that Emcore reserves the right to make changes without notice and shall not be held
responsible for any damages, including consequential, caused by reliance on the material presented,
including, but not limited to, typographical, arithmetical, or listing errors.
Copyright 2009 EMCORE Corporation
