13
Replacing the server drives
SVR-D2U-R710 Installation and Replacement Guide
Figure 10
Removing and replacing a drive
CAUTION
!
When installing a hard drive, ensure that the adjacent drives are
fully installed. Inserting a hard-drive carrier and attempting to lock
its handle next to a partially installed carrier can damage the
partially installed carrier's shield spring and make it unusable.
2. Install the hard drive as shown in
Figure 10
:
a. Press the button on the front of the drive carrier and open the
handle.
b. Insert the hard-drive carrier into the drive bay until the carrier
contacts the backplane.
c. Close the handle to lock the drive in place.
Once you have installed the replacement drive, you must add
the drive to the drive configuration through the service menu.
3. Replace the front bezel.
The drive replacement procedure is complete.
