12
SVR-D2U-R710 Installation and Replacement Guide
Replacing the server drives
Note:
Bezels are application-specific, and may not appear as shown. All
bezels include a key entry. Most include two tabs at either side that you press
toward the center to release the bezel from its latches.
Figure 9
Removing a front bezel
Each drive sled has LED indicators that show the current status of the
drive. A failed drive will have an amber LED indicator.
Replacing the failed drive
Once you have identified the failed drive:
1. Press the release button, and then open the drive handle and pull
the failed hard drive from the server chassis (
Figure 10
).
CL4391
1
1
